DragonForce 65 Version 8 ARTR - Supplied without radio system.

Everything is in the box: It takes at least a couple of hours to complete the build with the comprehensive instructions by the main designer John Tushingham. The yachts are constructed with servos fitted - fin, ballast & rudder just slot in. The supplied "A" carbon rig is part built ready to attach the sails & sheeting - stand is also supplied. Just requires batteries & you are sailing!

Radio: Ready to install your preferred radio system. We recommend using a system that has “End point adjustment” to have the ability to adjust the travel on the servos. 

Batteries: As we install the radio receiver in the servo tray battery position - safer & dryer. We recommend installing our USB boat rechargeable packages & fit the battery beside the fin box, you will also need an extension lead and some velcro to complete this conversion.Introduction: Our yachts have been developed for racing, so they not only look good but actually sail. With 11 different tuning adjustments, the sail shape can be altered to obtain a balanced performance both up & down wind. With the carbon mast, there is less rigging so no shrouds & spreaders - makes for easy setup. Product support is available across the world & with the spares & accessories including 3 further rigs/sails to keep you sailing in almost any wind condition. Join over 40,000 skippers sailing/racing DF65's & DF95's around the world.

Warranty: The electronics in these yachts (rudder servo, winch servo, switch, batteries, leads) are not waterproof and all care must be taken to keep the hull dry. Any water ingress that has damaged these components will not be covered under the warranty.

Specification:

Length: 650 mm

Beam: 116.5 mm

Rig Height: 915 mm

Overall Height: 1338 mm

RTR Total weight: 1200g (Batteries not included)

Sail Area (Mainsail): 1460 cm²

Sail Area (Jib): 766 cm²

Sail Area (Overall): 2226 cm²

Hull Material: Moulded ABS with painted finish and logo sticker

ARTR version (8815) No radio system installed

Boat box dimensions: 91.2 x 30.4 x 11.6

What's Included:

Fully Painted, Moulded ABS Hull

50 micron Mylar film racing sails with painted flow stripes and logo

Extruded carbon fibre mast and boom tubes

Extruded aluminium keel with zinc alloy ballast bulb

Metal geared digital rudder servo and fast, powerful sail winch

Display stand (Moulded plastic and glass fibre tubes)